A functional 3d printable hardtop for those who want all the benefits of a hardtop at the track, show, or just a fun DIY project. This top is designed to be ready to go with little modification and does not need to be reinforced with fiberglass. Just use your choice of zips/cables and adhesive to fasten the panels together with pre-modeled holes to make alignment a breeze. Dowel inserts can me modeled upon request.

This print is ideal for those who are looking for a lightweight solution to the increasingly expensive OEM hardtops. The top will drastically decrease sun exposure and improve aerodynamics of open top Miata's. For NA & NB Miata's only.

If you are looking for a different size, just reach out to me and I should be able to make one at no additional cost.

File Includes:
220X220X220
220x220x250
250x250x250
300x300x300
300x300x400 (17 pcs DOWEL) - New Panel Layout for the 300x300x400 printers. The panel count is 17, down from 18. 4mmx30mm metal dowel inserts are now incorporated between the panels.
300x300x400 (18 pcs ZIP)

A .8mm nozzle or larger is recommended. ASA is strongly recommended as the filament material due to its high heat & UV resistance. Print weight can be functional at just 15lbs or 7kgs. You will need to provide mounting solutions. I use the miatacage hardtop brackets and steel fasteners to connect to the brackets and top of the rollbar.

More info & instructions can be found here: https://www.fezcreations.com/support
Feel free to message me with any questions you may have.

Includes .3MF. Let me know if you need them split up or a different file format.

Customer Is responsible for constructing and using the top in a legal and safe way for their own intended purposes. This top may not be legal on all public roads and will have to advise local laws regarding aftermarket exterior car parts for public roadways.

This file shall not be resold or redistributed.